Construction using our milled logs is simple and straightforward. Most contractors already have the tools and skills to do this kind
of construction. |
The logs come in random lengths, to be cut and fit on site. This
can mean a large savings to the over-all cost of the project because
it allows last minute changes and flexibility without additional
cost. |
 We
recommend a double seal between logs with a closed cell vinyl foam compressed on the tongues and two beads of SHASCO log builder caulking placed on the log curve side of both tongues.
Some contractors like to add a bead of liquid nail down the center.
|
The logs are constructed with a butt and pass corner configuration.
This allows easy construction of a very strong corner with a true
log appearance. The logs are fastened at an 18" spacing with
8" or 10" log screws (depending
on log size) designed specifically for log construction. |
At each corner, the tongue should be chiseled off to allow the
next log course to fit flush. |
 After
the logs are secured at every vertical joint, we advise a three-step
process.
1)Drill a 3/4" hole down through the joint. |
 2)
Place a bit of log builder caulk in
the hole. |
 3)
Drive a pre-cut 3/4" dowel into the hole.
You now have a very strong and positive corner or other vertical
joint. |
| |
|
